Click for Larger ViewModel 2596 2-8 Inch Automatic Self-Cleaning Basket Strainer
Cast Iron or Stainless Steel, Flanged, 2" to 8"The Eaton Model 2596 2" to 8" Automatic Self-cleaning Strainer is designed for the continuous removal of particle solids from liquids in pipeline systems, preventing damage to expensive pipeline system components. It features the unique idL™ shaft seal that positively prevents leakage from the backwash shaft at the top of the strainer.
-
Features:
- Flow rates up to 1800 gpm (409 m3/hr)
- A broad selection of screen options
- Automatic backwashing for operator-free service and minimal backwash effluent
- Cenpeller technology for more efficient and complete backwashing
Available Sizes: 2", 3", 4", 6", 8"
Cenpeller™
To simplify maintenance the Model 2596 features a unitized modular assembly. The motor, gear reducer, and the internal operating mechanism are housed within the strainer cover and lift off as a unit. This makes all components easily accessible and reduces associated maintenance costs.
With an automatic control system monitoring the strainer operation, cleaning is accomplished by an integral backwash system. A small portion of the screen element is isolated and cleaned by reverse flow. The remaining screen area continues to strain – providing uninterrupted flow. With this efficient design, only a small amount of the liquid being strained is used to carry away the debris from the strainer. Continuous flow is assured and protection is provided for nozzles, pumps, valves, heat exchangers, and process equipment.
With an automatic control system monitoring the strainer operation, cleaning is accomplished by an integral backwash system. A small portion of the screen element is isolated and cleaned by reverse flow. The remaining screen area continues to strain – providing uninterrupted flow. With this efficient design, only a small amount of the liquid being strained is used to carry away the debris from the strainer. Continuous flow is assured and protection is provided for nozzles, pumps, valves, heat exchangers, and process equipment.
Flow Rates - Click for Larger View
Cenpeller™ Technology
A common problem in many automatic selfcleaning strainers is inefficient backwashing due to debris lodged in the strainer element.
The Model 2596 2"- 8" strainer features a unique vane plate positioned at the inlet of the strainer element where it contacts the process media before it enters the element. The vane causes the incoming liquid to move in a circular motion forcing the debris to lay up against the surface of the strainer element rather than lodging in the element’s openings. Lodged debris can negatively impact the differential pressure across the strainer, resulting in a shut down of the strainer and manual cleaning of the element.
Cenpeller Technology helps prevent this situation and delivers easier and more efficient backwashing.
A common problem in many automatic selfcleaning strainers is inefficient backwashing due to debris lodged in the strainer element.
The Model 2596 2"- 8" strainer features a unique vane plate positioned at the inlet of the strainer element where it contacts the process media before it enters the element. The vane causes the incoming liquid to move in a circular motion forcing the debris to lay up against the surface of the strainer element rather than lodging in the element’s openings. Lodged debris can negatively impact the differential pressure across the strainer, resulting in a shut down of the strainer and manual cleaning of the element.
Cenpeller Technology helps prevent this situation and delivers easier and more efficient backwashing.
Cenpeller™
Application Limits
• Cast Iron Class 125 Flange (-20° to 150 °F) 200 psi (2"- 8")
• Cast 316 Stainless Steel Class 150 Flange (-20° to 100 °F) 275 psi (2"- 4")
• 6"- 8" Fabricated Class 150 Flange (150 °F) 150 psi
• Cast Iron Class 125 Flange (-20° to 150 °F) 200 psi (2"- 8")
• Cast 316 Stainless Steel Class 150 Flange (-20° to 100 °F) 275 psi (2"- 4")
• 6"- 8" Fabricated Class 150 Flange (150 °F) 150 psi
Model 2596 Automatic Control Systems
Eaton Automatic Control Systems (ACS) are specifically designed to monitor and operate the backwash cleaning system of Eaton Models 2596 Automatic Strainers.
Click Here to View the Available Automatic Control Systems
Eaton Automatic Strainer Elements
Eaton offers a full range of element choices for Automatic Strainers.
All are manufactured to the toughest industry standards and are designed
for long term use in even the most demanding applications.
• 25 micron and 40 micron stainless steel element with a flow rate of up to 800 gpm
• Cast iron or stainless steel construction
Eaton Automatic Control Systems (ACS) are specifically designed to monitor and operate the backwash cleaning system of Eaton Models 2596 Automatic Strainers.
Click Here to View the Available Automatic Control Systems
Eaton Automatic Strainer Elements
Eaton offers a full range of element choices for Automatic Strainers.
All are manufactured to the toughest industry standards and are designed
for long term use in even the most demanding applications.
• 25 micron and 40 micron stainless steel element with a flow rate of up to 800 gpm
• Cast iron or stainless steel construction
Click for Larger View
Flow Rates - Click for Larger View
- Model 2596 2-8 Inch Automatic Self-Cleaning Basket Strainer Data Sheet
- Model 2596 Control Systems
- Model 2596 Automatic Self-Cleaning Basket Strainer Technical Data
- Eaton Automatic Self-Cleaning Pipeline Strainers Catalog
- Eaton Model 2596 Automatic Self-Cleaning Strainers - How It Works
- Model 2596 Control Systems Installation, Operation & Maintenance Manual
- Eaton Manual-Automatic Pipeline Strainers Catalog
- Eaton Basket and Screen Data
- Pressure Drop Calculations